# Source code for astropy.coordinates.transformations

```
# Licensed under a 3-clause BSD style license - see LICENSE.rst
"""
This module contains a general framework for defining graphs of transformations
between coordinates, suitable for either spatial coordinates or more generalized
coordinate systems.
The fundamental idea is that each class is a node in the transformation graph,
and transitions from one node to another are defined as functions (or methods)
wrapped in transformation objects.
This module also includes more specific transformation classes for
celestial/spatial coordinate frames, generally focused around matrix-style
transformations that are typically how the algorithms are defined.
"""
import heapq
import subprocess
from abc import ABCMeta, abstractmethod
from collections import defaultdict
from contextlib import contextmanager, suppress
from inspect import signature
from warnings import warn
import numpy as np
from astropy import units as u
from astropy.utils.exceptions import AstropyWarning
__all__ = [
"TransformGraph",
"CoordinateTransform",
"FunctionTransform",
"BaseAffineTransform",
"AffineTransform",
"StaticMatrixTransform",
"DynamicMatrixTransform",
"FunctionTransformWithFiniteDifference",
"CompositeTransform",
]
def frame_attrs_from_set(frame_set):
"""
A `dict` of all the attributes of all frame classes in this
`~astropy.coordinates.TransformGraph`.
Broken out of the class so this can be called on a temporary frame set to
validate new additions to the transform graph before actually adding them.
"""
result = {}
for frame_cls in frame_set:
result.update(frame_cls.frame_attributes)
return result
def frame_comps_from_set(frame_set):
"""
A `set` of all component names every defined within any frame class in
this `~astropy.coordinates.TransformGraph`.
Broken out of the class so this can be called on a temporary frame set to
validate new additions to the transform graph before actually adding them.
"""
result = set()
for frame_cls in frame_set:
rep_info = frame_cls._frame_specific_representation_info
for mappings in rep_info.values():
for rep_map in mappings:
result.update([rep_map.framename])
return result
[docs]
class TransformGraph:
"""
A graph representing the paths between coordinate frames.
"""
def __init__(self):
self._graph = defaultdict(dict)
self.invalidate_cache() # generates cache entries
@property
def _cached_names(self):
if self._cached_names_dct is None:
self._cached_names_dct = dct = {}
for c in self.frame_set:
nm = getattr(c, "name", None)
if nm is not None:
if not isinstance(nm, list):
nm = [nm]
for name in nm:
dct[name] = c
return self._cached_names_dct
@property
def frame_set(self):
"""
A `set` of all the frame classes present in this TransformGraph.
"""
if self._cached_frame_set is None:
self._cached_frame_set = set()
for a in self._graph:
self._cached_frame_set.add(a)
for b in self._graph[a]:
self._cached_frame_set.add(b)
return self._cached_frame_set.copy()
@property
def frame_attributes(self):
"""
A `dict` of all the attributes of all frame classes in this TransformGraph.
"""
if self._cached_frame_attributes is None:
self._cached_frame_attributes = frame_attrs_from_set(self.frame_set)
return self._cached_frame_attributes
@property
def frame_component_names(self):
"""
A `set` of all component names every defined within any frame class in
this TransformGraph.
"""
if self._cached_component_names is None:
self._cached_component_names = frame_comps_from_set(self.frame_set)
return self._cached_component_names
[docs]
def invalidate_cache(self):
"""
Invalidates the cache that stores optimizations for traversing the
transform graph. This is called automatically when transforms
are added or removed, but will need to be called manually if
weights on transforms are modified inplace.
"""
self._cached_names_dct = None
self._cached_frame_set = None
self._cached_frame_attributes = None
self._cached_component_names = None
self._shortestpaths = {}
self._composite_cache = {}
[docs]
def add_transform(self, fromsys, tosys, transform):
"""Add a new coordinate transformation to the graph.
Parameters
----------
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
transform : `~astropy.coordinates.CoordinateTransform`
The transformation object. Typically a
`~astropy.coordinates.CoordinateTransform` object, although it may
be some other callable that is called with the same signature.
Raises
------
TypeError
If ``fromsys`` or ``tosys`` are not classes or ``transform`` is
not callable.
"""
if not isinstance(fromsys, type):
raise TypeError("fromsys must be a class")
if not isinstance(tosys, type):
raise TypeError("tosys must be a class")
if not callable(transform):
raise TypeError("transform must be callable")
frame_set = self.frame_set.copy()
frame_set.add(fromsys)
frame_set.add(tosys)
# Now we check to see if any attributes on the proposed frames override
# *any* component names, which we can't allow for some of the logic in
# the SkyCoord initializer to work
attrs = set(frame_attrs_from_set(frame_set).keys())
comps = frame_comps_from_set(frame_set)
invalid_attrs = attrs.intersection(comps)
if invalid_attrs:
invalid_frames = set()
for attr in invalid_attrs:
if attr in fromsys.frame_attributes:
invalid_frames.update([fromsys])
if attr in tosys.frame_attributes:
invalid_frames.update([tosys])
raise ValueError(
f"Frame(s) {list(invalid_frames)} contain invalid attribute names:"
f" {invalid_attrs}\nFrame attributes can not conflict with *any* of"
" the frame data component names (see"
" `frame_transform_graph.frame_component_names`)."
)
self._graph[fromsys][tosys] = transform
self.invalidate_cache()
[docs]
def remove_transform(self, fromsys, tosys, transform):
"""
Removes a coordinate transform from the graph.
Parameters
----------
fromsys : class or None
The coordinate frame *class* to start from. If `None`,
``transform`` will be searched for and removed (``tosys`` must
also be `None`).
tosys : class or None
The coordinate frame *class* to transform into. If `None`,
``transform`` will be searched for and removed (``fromsys`` must
also be `None`).
transform : callable or None
The transformation object to be removed or `None`. If `None`
and ``tosys`` and ``fromsys`` are supplied, there will be no
check to ensure the correct object is removed.
"""
if fromsys is None or tosys is None:
if tosys is not fromsys:
raise ValueError("fromsys and tosys must both be None if either are")
if transform is None:
raise ValueError("cannot give all Nones to remove_transform")
# search for the requested transform by brute force and remove it
for a, agraph in self._graph.items():
for b, bgraph in agraph.items():
if bgraph is transform:
del agraph[b]
fromsys = a
break
# If the transform was found, need to break out of the outer for loop too
if fromsys:
break
else:
raise ValueError(f"Could not find transform {transform} in the graph")
elif transform is None or self._graph[fromsys].get(tosys, None) is transform:
self._graph[fromsys].pop(tosys, None)
else:
raise ValueError(
f"Current transform from {fromsys} to {tosys} is not {transform}"
)
# Remove the subgraph if it is now empty
if self._graph[fromsys] == {}:
self._graph.pop(fromsys)
self.invalidate_cache()
[docs]
def find_shortest_path(self, fromsys, tosys):
"""
Computes the shortest distance along the transform graph from
one system to another.
Parameters
----------
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
Returns
-------
path : list of class or None
The path from ``fromsys`` to ``tosys`` as an in-order sequence
of classes. This list includes *both* ``fromsys`` and
``tosys``. Is `None` if there is no possible path.
distance : float or int
The total distance/priority from ``fromsys`` to ``tosys``. If
priorities are not set this is the number of transforms
needed. Is ``inf`` if there is no possible path.
"""
inf = float("inf")
# special-case the 0 or 1-path
if tosys is fromsys and tosys not in self._graph[fromsys]:
# Means there's no transform necessary to go from it to itself.
return [tosys], 0
if tosys in self._graph[fromsys]:
# this will also catch the case where tosys is fromsys, but has
# a defined transform.
t = self._graph[fromsys][tosys]
return [fromsys, tosys], float(getattr(t, "priority", 1))
# otherwise, need to construct the path:
if fromsys in self._shortestpaths:
# already have a cached result
return self._shortestpaths[fromsys].get(tosys, (None, inf))
# use Dijkstra's algorithm to find shortest path in all other cases
# We store nodes as `dict` keys because differently from `list` uniqueness is
# guaranteed and differently from `set` insertion order is preserved.
nodes = {}
for node, node_graph in self._graph.items():
nodes[node] = None
nodes |= {node: None for node in node_graph}
if fromsys not in nodes or tosys not in nodes:
# fromsys or tosys are isolated or not registered, so there's
# certainly no way to get from one to the other
return None, inf
edgeweights = {}
# construct another graph that is a dict of dicts of priorities
# (used as edge weights in Dijkstra's algorithm)
for a, graph in self._graph.items():
edgeweights[a] = {b: float(getattr(graph[b], "priority", 1)) for b in graph}
# entries in q are [distance, count, nodeobj, pathlist]
# count is needed because in py 3.x, tie-breaking fails on the nodes.
# this way, insertion order is preserved if the weights are the same
q = [[0, -1, fromsys, []]]
q.extend([inf, i, n, []] for i, n in enumerate(nodes) if n is not fromsys)
# this dict will store the distance to node from ``fromsys`` and the path
result = {}
# definitely starts as a valid heap because of the insert line; from the
# node to itself is always the shortest distance
while q:
d, orderi, n, path = heapq.heappop(q)
if d == inf:
# everything left is unreachable from fromsys, just copy them to
# the results and jump out of the loop
result[n] = (None, d)
for d, orderi, n, path in q:
result[n] = (None, d)
break
result[n] = (path, d)
path.append(n)
if n not in edgeweights:
# this is a system that can be transformed to, but not from.
continue
for n2 in edgeweights[n]:
if n2 not in result: # already visited
# find where n2 is in the heap
for q_elem in q:
if q_elem[2] == n2:
if (newd := d + edgeweights[n][n2]) < q_elem[0]:
q_elem[0] = newd
q_elem[3] = list(path)
heapq.heapify(q)
break
else:
raise ValueError("n2 not in heap - this should be impossible!")
# cache for later use
self._shortestpaths[fromsys] = result
return result[tosys]
[docs]
def get_transform(self, fromsys, tosys):
"""Generates and returns the CompositeTransform for a transformation
between two coordinate systems.
Parameters
----------
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
Returns
-------
trans : `~astropy.coordinates.CompositeTransform` or None
If there is a path from ``fromsys`` to ``tosys``, this is a
transform object for that path. If no path could be found, this is
`None`.
Notes
-----
A `~astropy.coordinates.CompositeTransform` is always returned, because
`~astropy.coordinates.CompositeTransform` is slightly more adaptable in
the way it can be called than other transform classes. Specifically, it
takes care of intermediate steps of transformations in a way that is
consistent with 1-hop transformations.
"""
if not isinstance(fromsys, type):
raise TypeError("fromsys is not a class")
if not isinstance(tosys, type):
raise TypeError("tosys is not a class")
path, distance = self.find_shortest_path(fromsys, tosys)
if path is None:
return None
transforms = []
currsys = fromsys
for p in path[1:]: # first element is fromsys so we skip it
transforms.append(self._graph[currsys][p])
currsys = p
fttuple = (fromsys, tosys)
if fttuple not in self._composite_cache:
comptrans = CompositeTransform(
transforms, fromsys, tosys, register_graph=False
)
self._composite_cache[fttuple] = comptrans
return self._composite_cache[fttuple]
[docs]
def lookup_name(self, name):
"""
Tries to locate the coordinate class with the provided alias.
Parameters
----------
name : str
The alias to look up.
Returns
-------
`BaseCoordinateFrame` subclass
The coordinate class corresponding to the ``name`` or `None` if
no such class exists.
"""
return self._cached_names.get(name, None)
[docs]
def get_names(self):
"""
Returns all available transform names. They will all be
valid arguments to `lookup_name`.
Returns
-------
nms : list
The aliases for coordinate systems.
"""
return list(self._cached_names.keys())
[docs]
def to_dot_graph(
self,
priorities=True,
addnodes=[],
savefn=None,
savelayout="plain",
saveformat=None,
color_edges=True,
):
"""
Converts this transform graph to the graphviz_ DOT format.
Optionally saves it (requires `graphviz`_ be installed and on your path).
.. _graphviz: http://www.graphviz.org/
Parameters
----------
priorities : bool
If `True`, show the priority values for each transform. Otherwise,
the will not be included in the graph.
addnodes : sequence of str
Additional coordinate systems to add (this can include systems
already in the transform graph, but they will only appear once).
savefn : None or str
The file name to save this graph to or `None` to not save
to a file.
savelayout : {"plain", "dot", "neato", "fdp", "sfdp", "circo", "twopi", "nop", "nop2", "osage", "patchwork"}
The graphviz program to use to layout the graph (see
graphviz_ for details) or 'plain' to just save the DOT graph
content. Ignored if ``savefn`` is `None`.
saveformat : str
The graphviz output format. (e.g. the ``-Txxx`` option for
the command line program - see graphviz docs for details).
Ignored if ``savefn`` is `None`.
color_edges : bool
Color the edges between two nodes (frames) based on the type of
transform. ``FunctionTransform``: red, ``StaticMatrixTransform``:
blue, ``DynamicMatrixTransform``: green.
Returns
-------
dotgraph : str
A string with the DOT format graph.
"""
# We store nodes as `dict` keys because differently from `list` uniqueness is
# guaranteed and differently from `set` insertion order is preserved.
nodes = {}
for node, node_graph in self._graph.items():
nodes[node] = None
nodes |= {node: None for node in node_graph}
nodes |= {node: None for node in addnodes}
nodenames = []
invclsaliases = {
f: [k for k, v in self._cached_names.items() if v == f]
for f in self.frame_set
}
for n in nodes:
if n in invclsaliases:
aliases = "`\\n`".join(invclsaliases[n])
nodenames.append(
f'{n.__name__} [shape=oval label="{n.__name__}\\n`{aliases}`"]'
)
else:
nodenames.append(n.__name__ + "[ shape=oval ]")
edgenames = []
# Now the edges
for a, agraph in self._graph.items():
for b, transform in agraph.items():
pri = getattr(transform, "priority", 1)
color = trans_to_color[transform.__class__] if color_edges else "black"
edgenames.append((a.__name__, b.__name__, pri, color))
# generate simple dot format graph
lines = ["digraph AstropyCoordinateTransformGraph {"]
lines.append("graph [rankdir=LR]")
lines.append("; ".join(nodenames) + ";")
for enm1, enm2, weights, color in edgenames:
labelstr_fmt = "[ {0} {1} ]"
priority_part = f'label = "{weights}"' if priorities else ""
color_part = f'color = "{color}"'
labelstr = labelstr_fmt.format(priority_part, color_part)
lines.append(f"{enm1} -> {enm2}{labelstr};")
lines.append("")
lines.append("overlap=false")
lines.append("}")
dotgraph = "\n".join(lines)
if savefn is not None:
if savelayout == "plain":
with open(savefn, "w") as f:
f.write(dotgraph)
# Options from https://graphviz.org/docs/layouts/
elif savelayout in (
"dot",
"neato",
"fdp",
"sfdp",
"circo",
"twopi",
"nop",
"nop2",
"osage",
"patchwork",
):
args = [savelayout]
if saveformat is not None:
args.append("-T" + saveformat)
proc = subprocess.Popen(
args,
stdin=subprocess.PIPE,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
)
stdout, stderr = proc.communicate(dotgraph)
if proc.returncode != 0:
raise OSError("problem running graphviz: \n" + stderr)
with open(savefn, "w") as f:
f.write(stdout)
else:
raise NotImplementedError(f'savelayout="{savelayout}" is not supported')
return dotgraph
[docs]
def to_networkx_graph(self):
"""
Converts this transform graph into a networkx graph.
.. note::
You must have the `networkx <https://networkx.github.io/>`_
package installed for this to work.
Returns
-------
nxgraph : ``networkx.Graph``
This `~astropy.coordinates.TransformGraph` as a
`networkx.Graph <https://networkx.github.io/documentation/stable/reference/classes/graph.html>`_.
"""
import networkx as nx
nxgraph = nx.Graph()
# first make the nodes
for a in self._graph:
if a not in nxgraph:
nxgraph.add_node(a)
for b in self._graph[a]:
if b not in nxgraph:
nxgraph.add_node(b)
# Now the edges
for a in self._graph:
agraph = self._graph[a]
for b in agraph:
transform = agraph[b]
pri = transform.priority if hasattr(transform, "priority") else 1
color = trans_to_color[transform.__class__]
nxgraph.add_edge(a, b, weight=pri, color=color)
return nxgraph
[docs]
def transform(self, transcls, fromsys, tosys, priority=1, **kwargs):
"""A function decorator for defining transformations.
.. note::
If decorating a static method of a class, ``@staticmethod``
should be added *above* this decorator.
Parameters
----------
transcls : class
The class of the transformation object to create.
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
Additional keyword arguments are passed into the ``transcls``
constructor.
Returns
-------
deco : function
A function that can be called on another function as a decorator
(see example).
Notes
-----
This decorator assumes the first argument of the ``transcls``
initializer accepts a callable, and that the second and third are
``fromsys`` and ``tosys``. If this is not true, you should just
initialize the class manually and use
`~astropy.coordinates.TransformGraph.add_transform` instead of this
decorator.
Examples
--------
::
graph = TransformGraph()
class Frame1(BaseCoordinateFrame):
...
class Frame2(BaseCoordinateFrame):
...
@graph.transform(FunctionTransform, Frame1, Frame2)
def f1_to_f2(f1_obj):
... do something with f1_obj ...
return f2_obj
"""
def deco(func):
# this doesn't do anything directly with the transform because
# ``register_graph=self`` stores it in the transform graph
# automatically
transcls(
func, fromsys, tosys, priority=priority, register_graph=self, **kwargs
)
return func
return deco
def _add_merged_transform(self, fromsys, tosys, *furthersys, priority=1):
"""
Add a single-step transform that encapsulates a multi-step transformation path,
using the transforms that already exist in the graph.
The created transform internally calls the existing transforms. If all of the
transforms are affine, the merged transform is
`~astropy.coordinates.DynamicMatrixTransform` (if there are no
origin shifts) or `~astropy.coordinates.AffineTransform`
(otherwise). If at least one of the transforms is not affine, the merged
transform is
`~astropy.coordinates.FunctionTransformWithFiniteDifference`.
This method is primarily useful for defining loopback transformations
(i.e., where ``fromsys`` and the final ``tosys`` are the same).
Parameters
----------
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform to.
*furthersys : class
Additional coordinate frame classes to transform to in order.
priority : number
The priority of this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
Notes
-----
Even though the created transform is a single step in the graph, it
will still internally call the constituent transforms. Thus, there is
no performance benefit for using this created transform.
For Astropy's built-in frames, loopback transformations typically use
`~astropy.coordinates.ICRS` to be safe. Transforming through an inertial
frame ensures that changes in observation time and observer
location/velocity are properly accounted for.
An error will be raised if a direct transform between ``fromsys`` and
``tosys`` already exist.
"""
frames = [fromsys, tosys, *furthersys]
lastsys = frames[-1]
full_path = self.get_transform(fromsys, lastsys)
transforms = [
self.get_transform(frame_a, frame_b)
for frame_a, frame_b in zip(frames[:-1], frames[1:])
]
if None in transforms:
raise ValueError("This transformation path is not possible")
if len(full_path.transforms) == 1:
raise ValueError(
f"A direct transform for {fromsys.__name__}->{lastsys.__name__} already"
" exists"
)
self.add_transform(
fromsys,
lastsys,
CompositeTransform(
transforms, fromsys, lastsys, priority=priority
)._as_single_transform(),
)
[docs]
@contextmanager
def impose_finite_difference_dt(self, dt):
"""
Context manager to impose a finite-difference time step on all applicable transformations.
For each transformation in this transformation graph that has the attribute
``finite_difference_dt``, that attribute is set to the provided value. The only standard
transformation with this attribute is
`~astropy.coordinates.FunctionTransformWithFiniteDifference`.
Parameters
----------
dt : `~astropy.units.Quantity` ['time'] or callable
If a quantity, this is the size of the differential used to do the finite difference.
If a callable, should accept ``(fromcoord, toframe)`` and return the ``dt`` value.
"""
key = "finite_difference_dt"
saved_settings = []
try:
for to_frames in self._graph.values():
for transform in to_frames.values():
if hasattr(transform, key):
old_setting = (transform, key, getattr(transform, key))
saved_settings.append(old_setting)
setattr(transform, key, dt)
yield
finally:
for setting in saved_settings:
setattr(*setting)
# <-------------------Define the builtin transform classes-------------------->
[docs]
class CoordinateTransform(metaclass=ABCMeta):
"""
An object that transforms a coordinate from one system to another.
Subclasses must implement `__call__` with the provided signature.
They should also call this superclass's ``__init__`` in their
``__init__``.
Parameters
----------
fromsys : `~astropy.coordinates.BaseCoordinateFrame` subclass
The coordinate frame class to start from.
tosys : `~astropy.coordinates.BaseCoordinateFrame` subclass
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
register_graph : `~astropy.coordinates.TransformGraph` or None
A graph to register this transformation with on creation, or
`None` to leave it unregistered.
"""
def __init__(self, fromsys, tosys, priority=1, register_graph=None):
if not isinstance(fromsys, type):
raise TypeError("fromsys must be a class")
if not isinstance(tosys, type):
raise TypeError("tosys must be a class")
self.fromsys = fromsys
self.tosys = tosys
self.priority = float(priority)
if register_graph:
# this will do the type-checking when it adds to the graph
self.register(register_graph)
else:
if not isinstance(fromsys, type) or not isinstance(tosys, type):
raise TypeError("fromsys and tosys must be classes")
self.overlapping_frame_attr_names = overlap = []
if hasattr(fromsys, "frame_attributes") and hasattr(tosys, "frame_attributes"):
# the if statement is there so that non-frame things might be usable
# if it makes sense
for from_nm in fromsys.frame_attributes:
if from_nm in tosys.frame_attributes:
overlap.append(from_nm)
[docs]
def register(self, graph):
"""
Add this transformation to the requested Transformation graph,
replacing anything already connecting these two coordinates.
Parameters
----------
graph : `~astropy.coordinates.TransformGraph` object
The graph to register this transformation with.
"""
graph.add_transform(self.fromsys, self.tosys, self)
[docs]
def unregister(self, graph):
"""
Remove this transformation from the requested transformation
graph.
Parameters
----------
graph : a TransformGraph object
The graph to unregister this transformation from.
Raises
------
ValueError
If this is not currently in the transform graph.
"""
graph.remove_transform(self.fromsys, self.tosys, self)
[docs]
@abstractmethod
def __call__(self, fromcoord, toframe):
"""
Does the actual coordinate transformation from the ``fromsys`` class to
the ``tosys`` class.
Parameters
----------
fromcoord : `~astropy.coordinates.BaseCoordinateFrame` subclass instance
An object of class matching ``fromsys`` that is to be transformed.
toframe : object
An object that has the attributes necessary to fully specify the
frame. That is, it must have attributes with names that match the
keys of the dictionary ``tosys.frame_attributes``.
Typically this is of class ``tosys``, but it *might* be
some other class as long as it has the appropriate attributes.
Returns
-------
tocoord : `~astropy.coordinates.BaseCoordinateFrame` subclass instance
The new coordinate after the transform has been applied.
"""
[docs]
class FunctionTransform(CoordinateTransform):
"""
A coordinate transformation defined by a function that accepts a
coordinate object and returns the transformed coordinate object.
Parameters
----------
func : callable
The transformation function. Should have a call signature
``func(formcoord, toframe)``. Note that, unlike
`CoordinateTransform.__call__`, ``toframe`` is assumed to be of type
``tosys`` for this function.
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
register_graph : `~astropy.coordinates.TransformGraph` or None
A graph to register this transformation with on creation, or
`None` to leave it unregistered.
Raises
------
TypeError
If ``func`` is not callable.
ValueError
If ``func`` cannot accept two arguments.
"""
def __init__(self, func, fromsys, tosys, priority=1, register_graph=None):
if not callable(func):
raise TypeError("func must be callable")
with suppress(TypeError):
sig = signature(func)
kinds = [x.kind for x in sig.parameters.values()]
if (
len(x for x in kinds if x == sig.POSITIONAL_ONLY) != 2
and sig.VAR_POSITIONAL not in kinds
):
raise ValueError("provided function does not accept two arguments")
self.func = func
super().__init__(
fromsys, tosys, priority=priority, register_graph=register_graph
)
[docs]
def __call__(self, fromcoord, toframe):
res = self.func(fromcoord, toframe)
if not isinstance(res, self.tosys):
raise TypeError(
f"the transformation function yielded {res} but "
f"should have been of type {self.tosys}"
)
if fromcoord.data.differentials and not res.data.differentials:
warn(
"Applied a FunctionTransform to a coordinate frame with "
"differentials, but the FunctionTransform does not handle "
"differentials, so they have been dropped.",
AstropyWarning,
)
return res
[docs]
class FunctionTransformWithFiniteDifference(FunctionTransform):
r"""Transormation based on functions using finite difference for velocities.
A coordinate transformation that works like a
`~astropy.coordinates.FunctionTransform`, but computes velocity shifts
based on the finite-difference relative to one of the frame attributes.
Note that the transform function should *not* change the differential at
all in this case, as any differentials will be overridden.
When a differential is in the from coordinate, the finite difference
calculation has two components. The first part is simple the existing
differential, but re-orientation (using finite-difference techniques) to
point in the direction the velocity vector has in the *new* frame. The
second component is the "induced" velocity. That is, the velocity
intrinsic to the frame itself, estimated by shifting the frame using the
``finite_difference_frameattr_name`` frame attribute a small amount
(``finite_difference_dt``) in time and re-calculating the position.
Parameters
----------
finite_difference_frameattr_name : str or None
The name of the frame attribute on the frames to use for the finite
difference. Both the to and the from frame will be checked for this
attribute, but only one needs to have it. If None, no velocity
component induced from the frame itself will be included - only the
re-orientation of any existing differential.
finite_difference_dt : `~astropy.units.Quantity` ['time'] or callable
If a quantity, this is the size of the differential used to do the
finite difference. If a callable, should accept
``(fromcoord, toframe)`` and return the ``dt`` value.
symmetric_finite_difference : bool
If True, the finite difference is computed as
:math:`\frac{x(t + \Delta t / 2) - x(t + \Delta t / 2)}{\Delta t}`, or
if False, :math:`\frac{x(t + \Delta t) - x(t)}{\Delta t}`. The latter
case has slightly better performance (and more stable finite difference
behavior).
All other parameters are identical to the initializer for
`~astropy.coordinates.FunctionTransform`.
"""
def __init__(
self,
func,
fromsys,
tosys,
priority=1,
register_graph=None,
finite_difference_frameattr_name="obstime",
finite_difference_dt=1 * u.second,
symmetric_finite_difference=True,
):
super().__init__(func, fromsys, tosys, priority, register_graph)
self.finite_difference_frameattr_name = finite_difference_frameattr_name
self.finite_difference_dt = finite_difference_dt
self.symmetric_finite_difference = symmetric_finite_difference
@property
def finite_difference_frameattr_name(self):
return self._finite_difference_frameattr_name
@finite_difference_frameattr_name.setter
def finite_difference_frameattr_name(self, value):
if value is None:
self._diff_attr_in_fromsys = self._diff_attr_in_tosys = False
else:
diff_attr_in_fromsys = value in self.fromsys.frame_attributes
diff_attr_in_tosys = value in self.tosys.frame_attributes
if diff_attr_in_fromsys or diff_attr_in_tosys:
self._diff_attr_in_fromsys = diff_attr_in_fromsys
self._diff_attr_in_tosys = diff_attr_in_tosys
else:
raise ValueError(
f"Frame attribute name {value} is not a frame attribute of"
f" {self.fromsys} or {self.tosys}"
)
self._finite_difference_frameattr_name = value
[docs]
def __call__(self, fromcoord, toframe):
from .representation import CartesianDifferential, CartesianRepresentation
supcall = self.func
if not fromcoord.data.differentials:
return supcall(fromcoord, toframe)
# this is the finite difference case
if callable(self.finite_difference_dt):
dt = self.finite_difference_dt(fromcoord, toframe)
else:
dt = self.finite_difference_dt
halfdt = dt / 2
from_diffless = fromcoord.realize_frame(fromcoord.data.without_differentials())
reprwithoutdiff = supcall(from_diffless, toframe)
# first we use the existing differential to compute an offset due to
# the already-existing velocity, but in the new frame
fromcoord_cart = fromcoord.cartesian
if self.symmetric_finite_difference:
fwdxyz = (
fromcoord_cart.xyz + fromcoord_cart.differentials["s"].d_xyz * halfdt
)
fwd = supcall(
fromcoord.realize_frame(CartesianRepresentation(fwdxyz)), toframe
)
backxyz = (
fromcoord_cart.xyz - fromcoord_cart.differentials["s"].d_xyz * halfdt
)
back = supcall(
fromcoord.realize_frame(CartesianRepresentation(backxyz)), toframe
)
else:
fwdxyz = fromcoord_cart.xyz + fromcoord_cart.differentials["s"].d_xyz * dt
fwd = supcall(
fromcoord.realize_frame(CartesianRepresentation(fwdxyz)), toframe
)
back = reprwithoutdiff
diffxyz = (fwd.cartesian - back.cartesian).xyz / dt
# now we compute the "induced" velocities due to any movement in
# the frame itself over time
attrname = self.finite_difference_frameattr_name
if attrname is not None:
if self.symmetric_finite_difference:
if self._diff_attr_in_fromsys:
kws = {attrname: getattr(from_diffless, attrname) + halfdt}
from_diffless_fwd = from_diffless.replicate(**kws)
else:
from_diffless_fwd = from_diffless
if self._diff_attr_in_tosys:
kws = {attrname: getattr(toframe, attrname) + halfdt}
fwd_frame = toframe.replicate_without_data(**kws)
else:
fwd_frame = toframe
fwd = supcall(from_diffless_fwd, fwd_frame)
if self._diff_attr_in_fromsys:
kws = {attrname: getattr(from_diffless, attrname) - halfdt}
from_diffless_back = from_diffless.replicate(**kws)
else:
from_diffless_back = from_diffless
if self._diff_attr_in_tosys:
kws = {attrname: getattr(toframe, attrname) - halfdt}
back_frame = toframe.replicate_without_data(**kws)
else:
back_frame = toframe
back = supcall(from_diffless_back, back_frame)
else:
if self._diff_attr_in_fromsys:
kws = {attrname: getattr(from_diffless, attrname) + dt}
from_diffless_fwd = from_diffless.replicate(**kws)
else:
from_diffless_fwd = from_diffless
if self._diff_attr_in_tosys:
kws = {attrname: getattr(toframe, attrname) + dt}
fwd_frame = toframe.replicate_without_data(**kws)
else:
fwd_frame = toframe
fwd = supcall(from_diffless_fwd, fwd_frame)
back = reprwithoutdiff
diffxyz += (fwd.cartesian - back.cartesian).xyz / dt
newdiff = CartesianDifferential(diffxyz)
reprwithdiff = reprwithoutdiff.data.to_cartesian().with_differentials(newdiff)
return reprwithoutdiff.realize_frame(reprwithdiff)
[docs]
class BaseAffineTransform(CoordinateTransform):
"""Base class for common functionality between the ``AffineTransform``-type
subclasses.
This base class is needed because `~astropy.coordinates.AffineTransform`
and the matrix transform classes share the ``__call__()`` method, but
differ in how they generate the affine parameters.
`~astropy.coordinates.StaticMatrixTransform` passes in a matrix stored as a
class attribute, and both of the matrix transforms pass in ``None`` for the
offset. Hence, user subclasses would likely want to subclass this (rather
than `~astropy.coordinates.AffineTransform`) if they want to provide
alternative transformations using this machinery.
"""
def _apply_transform(self, fromcoord, matrix, offset):
from .representation import (
CartesianDifferential,
RadialDifferential,
SphericalCosLatDifferential,
SphericalDifferential,
UnitSphericalRepresentation,
)
data = fromcoord.data
has_velocity = "s" in data.differentials
# Bail out if no transform is actually requested
if matrix is None and offset is None:
return data
# list of unit differentials
_unit_diffs = (
SphericalDifferential._unit_differential,
SphericalCosLatDifferential._unit_differential,
)
unit_vel_diff = has_velocity and isinstance(
data.differentials["s"], _unit_diffs
)
rad_vel_diff = has_velocity and isinstance(
data.differentials["s"], RadialDifferential
)
# Some initial checking to short-circuit doing any re-representation if
# we're going to fail anyways:
if isinstance(data, UnitSphericalRepresentation) and offset is not None:
raise TypeError(
"Position information stored on coordinate frame "
"is insufficient to do a full-space position "
"transformation (representation class: {data.__class__})"
)
elif (
has_velocity
and (unit_vel_diff or rad_vel_diff)
and offset is not None
and "s" in offset.differentials
):
# Coordinate has a velocity, but it is not a full-space velocity
# that we need to do a velocity offset
raise TypeError(
"Velocity information stored on coordinate frame is insufficient to do"
" a full-space velocity transformation (differential class:"
f" {data.differentials['s'].__class__})"
)
elif len(data.differentials) > 1:
# We should never get here because the frame initializer shouldn't
# allow more differentials, but this just adds protection for
# subclasses that somehow skip the checks
raise ValueError(
"Representation passed to AffineTransform contains multiple associated"
" differentials. Only a single differential with velocity units is"
f" presently supported (differentials: {data.differentials})."
)
# If the representation is a UnitSphericalRepresentation, and this is
# just a MatrixTransform, we have to try to turn the differential into a
# Unit version of the differential (if no radial velocity) or a
# sphericaldifferential with zero proper motion (if only a radial
# velocity) so that the matrix operation works
if (
has_velocity
and isinstance(data, UnitSphericalRepresentation)
and not (unit_vel_diff or rad_vel_diff)
):
# retrieve just velocity differential
unit_diff = data.differentials["s"].represent_as(
data.differentials["s"]._unit_differential, data
)
data = data.with_differentials({"s": unit_diff}) # updates key
# If it's a RadialDifferential, we flat-out ignore the differentials
# This is because, by this point (past the validation above), we can
# only possibly be doing a rotation-only transformation, and that
# won't change the radial differential. We later add it back in
elif rad_vel_diff:
data = data.without_differentials()
# Convert the representation and differentials to cartesian without
# having them attached to a frame
rep = data.to_cartesian()
diffs = {
k: diff.represent_as(CartesianDifferential, data)
for k, diff in data.differentials.items()
}
rep = rep.with_differentials(diffs)
# Only do transform if matrix is specified. This is for speed in
# transformations that only specify an offset (e.g., LSR)
if matrix is not None:
# Note: this applies to both representation and differentials
rep = rep.transform(matrix)
# TODO: if we decide to allow arithmetic between representations that
# contain differentials, this can be tidied up
newrep = rep.without_differentials()
if offset is not None:
newrep += offset.without_differentials()
# We need a velocity (time derivative) and, for now, are strict: the
# representation can only contain a velocity differential and no others.
if has_velocity and not rad_vel_diff:
veldiff = rep.differentials["s"] # already in Cartesian form
if offset is not None and "s" in offset.differentials:
veldiff += offset.differentials["s"]
newrep = newrep.with_differentials({"s": veldiff})
if isinstance(fromcoord.data, UnitSphericalRepresentation):
# Special-case this because otherwise the return object will think
# it has a valid distance with the default return (a
# CartesianRepresentation instance)
if has_velocity and not unit_vel_diff and not rad_vel_diff:
# We have to first represent as the Unit types we converted to,
# then put the d_distance information back in to the
# differentials and re-represent as their original forms
newdiff = newrep.differentials["s"]
_unit_cls = fromcoord.data.differentials["s"]._unit_differential
newdiff = newdiff.represent_as(_unit_cls, newrep)
kwargs = {comp: getattr(newdiff, comp) for comp in newdiff.components}
kwargs["d_distance"] = fromcoord.data.differentials["s"].d_distance
diffs = {
"s": type(fromcoord.data.differentials["s"])(copy=False, **kwargs)
}
elif has_velocity and unit_vel_diff:
newdiff = newrep.differentials["s"].represent_as(
fromcoord.data.differentials["s"].__class__, newrep
)
diffs = {"s": newdiff}
else:
diffs = newrep.differentials
newrep = newrep.represent_as(type(fromcoord.data)).with_differentials(diffs)
elif has_velocity and unit_vel_diff:
# Here, we're in the case where the representation is not
# UnitSpherical, but the differential *is* one of the UnitSpherical
# types. We have to convert back to that differential class or the
# resulting frame will think it has a valid radial_velocity. This
# can probably be cleaned up: we currently have to go through the
# dimensional version of the differential before representing as the
# unit differential so that the units work out (the distance length
# unit shouldn't appear in the resulting proper motions)
diff_cls = fromcoord.data.differentials["s"].__class__
newrep = newrep.represent_as(
type(fromcoord.data), diff_cls._dimensional_differential
).represent_as(type(fromcoord.data), diff_cls)
# We pulled the radial differential off of the representation
# earlier, so now we need to put it back. But, in order to do that, we
# have to turn the representation into a repr that is compatible with
# having a RadialDifferential
if has_velocity and rad_vel_diff:
newrep = newrep.represent_as(fromcoord.data.__class__)
newrep = newrep.with_differentials({"s": fromcoord.data.differentials["s"]})
return newrep
[docs]
def __call__(self, fromcoord, toframe):
params = self._affine_params(fromcoord, toframe)
newrep = self._apply_transform(fromcoord, *params)
return toframe.realize_frame(newrep)
@abstractmethod
def _affine_params(self, fromcoord, toframe):
pass
[docs]
class AffineTransform(BaseAffineTransform):
"""
A coordinate transformation specified as a function that yields a 3 x 3
cartesian transformation matrix and a tuple of displacement vectors.
See `~astropy.coordinates.Galactocentric` for
an example.
Parameters
----------
transform_func : callable
A callable that has the signature ``transform_func(fromcoord, toframe)``
and returns: a (3, 3) matrix that operates on ``fromcoord`` in a
Cartesian representation, and a ``CartesianRepresentation`` with
(optionally) an attached velocity ``CartesianDifferential`` to represent
a translation and offset in velocity to apply after the matrix
operation.
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
register_graph : `~astropy.coordinates.TransformGraph` or None
A graph to register this transformation with on creation, or
`None` to leave it unregistered.
Raises
------
TypeError
If ``transform_func`` is not callable
"""
def __init__(self, transform_func, fromsys, tosys, priority=1, register_graph=None):
if not callable(transform_func):
raise TypeError("transform_func is not callable")
self.transform_func = transform_func
super().__init__(
fromsys, tosys, priority=priority, register_graph=register_graph
)
def _affine_params(self, fromcoord, toframe):
return self.transform_func(fromcoord, toframe)
[docs]
class StaticMatrixTransform(BaseAffineTransform):
"""
A coordinate transformation defined as a 3 x 3 cartesian
transformation matrix.
This is distinct from DynamicMatrixTransform in that this kind of matrix is
independent of frame attributes. That is, it depends *only* on the class of
the frame.
Parameters
----------
matrix : array-like or callable
A 3 x 3 matrix for transforming 3-vectors. In most cases will
be unitary (although this is not strictly required). If a callable,
will be called *with no arguments* to get the matrix.
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
register_graph : `~astropy.coordinates.TransformGraph` or None
A graph to register this transformation with on creation, or
`None` to leave it unregistered.
Raises
------
ValueError
If the matrix is not 3 x 3
"""
def __init__(self, matrix, fromsys, tosys, priority=1, register_graph=None):
if callable(matrix):
matrix = matrix()
self.matrix = np.array(matrix)
if self.matrix.shape != (3, 3):
raise ValueError("Provided matrix is not 3 x 3")
super().__init__(
fromsys, tosys, priority=priority, register_graph=register_graph
)
def _affine_params(self, fromcoord, toframe):
return self.matrix, None
[docs]
class DynamicMatrixTransform(BaseAffineTransform):
"""
A coordinate transformation specified as a function that yields a
3 x 3 cartesian transformation matrix.
This is similar to, but distinct from StaticMatrixTransform, in that the
matrix for this class might depend on frame attributes.
Parameters
----------
matrix_func : callable
A callable that has the signature ``matrix_func(fromcoord, toframe)`` and
returns a 3 x 3 matrix that converts ``fromcoord`` in a cartesian
representation to the new coordinate system.
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
register_graph : `~astropy.coordinates.TransformGraph` or None
A graph to register this transformation with on creation, or
`None` to leave it unregistered.
Raises
------
TypeError
If ``matrix_func`` is not callable
"""
def __init__(self, matrix_func, fromsys, tosys, priority=1, register_graph=None):
if not callable(matrix_func):
raise TypeError("matrix_func is not callable")
self.matrix_func = matrix_func
super().__init__(
fromsys, tosys, priority=priority, register_graph=register_graph
)
def _affine_params(self, fromcoord, toframe):
return self.matrix_func(fromcoord, toframe), None
[docs]
class CompositeTransform(CoordinateTransform):
"""
A transformation constructed by combining together a series of single-step
transformations.
Note that the intermediate frame objects are constructed using any frame
attributes in ``toframe`` or ``fromframe`` that overlap with the intermediate
frame (``toframe`` favored over ``fromframe`` if there's a conflict). Any frame
attributes that are not present use the defaults.
Parameters
----------
transforms : sequence of `~astropy.coordinates.CoordinateTransform` object
The sequence of transformations to apply.
fromsys : class
The coordinate frame class to start from.
tosys : class
The coordinate frame class to transform into.
priority : float or int
The priority if this transform when finding the shortest
coordinate transform path - large numbers are lower priorities.
register_graph : `~astropy.coordinates.TransformGraph` or None
A graph to register this transformation with on creation, or
`None` to leave it unregistered.
collapse_static_mats : bool
If `True`, consecutive `~astropy.coordinates.StaticMatrixTransform`
will be collapsed into a single transformation to speed up the
calculation.
"""
def __init__(
self,
transforms,
fromsys,
tosys,
priority=1,
register_graph=None,
collapse_static_mats=True,
):
super().__init__(
fromsys, tosys, priority=priority, register_graph=register_graph
)
if collapse_static_mats:
transforms = self._combine_statics(transforms)
self.transforms = tuple(transforms)
def _combine_statics(self, transforms):
"""
Combines together sequences of StaticMatrixTransform's into a single
transform and returns it.
"""
newtrans = []
for currtrans in transforms:
lasttrans = newtrans[-1] if len(newtrans) > 0 else None
if isinstance(lasttrans, StaticMatrixTransform) and isinstance(
currtrans, StaticMatrixTransform
):
newtrans[-1] = StaticMatrixTransform(
currtrans.matrix @ lasttrans.matrix,
lasttrans.fromsys,
currtrans.tosys,
)
else:
newtrans.append(currtrans)
return newtrans
[docs]
def __call__(self, fromcoord, toframe):
curr_coord = fromcoord
for t in self.transforms:
# build an intermediate frame with attributes taken from either
# `toframe`, or if not there, `fromcoord`, or if not there, use
# the defaults
# TODO: caching this information when creating the transform may
# speed things up a lot
frattrs = {}
for inter_frame_attr_nm in t.tosys.frame_attributes:
if hasattr(toframe, inter_frame_attr_nm):
attr = getattr(toframe, inter_frame_attr_nm)
frattrs[inter_frame_attr_nm] = attr
elif hasattr(fromcoord, inter_frame_attr_nm):
attr = getattr(fromcoord, inter_frame_attr_nm)
frattrs[inter_frame_attr_nm] = attr
curr_toframe = t.tosys(**frattrs)
curr_coord = t(curr_coord, curr_toframe)
# this is safe even in the case where self.transforms is empty, because
# coordinate objects are immutable, so copying is not needed
return curr_coord
def _as_single_transform(self):
"""
Return an encapsulated version of the composite transform so that it appears to
be a single transform.
The returned transform internally calls the constituent transforms. If all of
the transforms are affine, the merged transform is
`~astropy.coordinates.DynamicMatrixTransform` (if there are no
origin shifts) or `~astropy.coordinates.AffineTransform`
(otherwise). If at least one of the transforms is not affine, the merged
transform is
`~astropy.coordinates.FunctionTransformWithFiniteDifference`.
"""
# Create a list of the transforms including flattening any constituent CompositeTransform
transforms = [
t if not isinstance(t, CompositeTransform) else t._as_single_transform()
for t in self.transforms
]
if all(isinstance(t, BaseAffineTransform) for t in transforms):
# Check if there may be an origin shift
fixed_origin = all(
isinstance(t, (StaticMatrixTransform, DynamicMatrixTransform))
for t in transforms
)
# Dynamically define the transformation function
def single_transform(from_coo, to_frame):
if from_coo.is_equivalent_frame(to_frame): # loopback to the same frame
return None if fixed_origin else (None, None)
# Create a merged attribute dictionary for any intermediate frames
# For any attributes shared by the "from"/"to" frames, the "to" frame takes
# precedence because this is the same choice implemented in __call__()
merged_attr = {
name: getattr(from_coo, name) for name in from_coo.frame_attributes
}
merged_attr.update(
{
name: getattr(to_frame, name)
for name in to_frame.frame_attributes
}
)
affine_params = (None, None)
# Step through each transform step (frame A -> frame B)
for i, t in enumerate(transforms):
# Extract the relevant attributes for frame A
if i == 0:
# If frame A is actually the initial frame, preserve its attributes
a_attr = {
name: getattr(from_coo, name)
for name in from_coo.frame_attributes
}
else:
a_attr = {
k: v
for k, v in merged_attr.items()
if k in t.fromsys.frame_attributes
}
# Extract the relevant attributes for frame B
b_attr = {
k: v
for k, v in merged_attr.items()
if k in t.tosys.frame_attributes
}
# Obtain the affine parameters for the transform
# Note that we insert some dummy data into frame A because the transformation
# machinery requires there to be data present. Removing that limitation
# is a possible TODO, but some care would need to be taken because some affine
# transforms have branching code depending on the presence of differentials.
next_affine_params = t._affine_params(
t.fromsys(from_coo.data, **a_attr), t.tosys(**b_attr)
)
# Combine the affine parameters with the running set
affine_params = _combine_affine_params(
affine_params, next_affine_params
)
# If there is no origin shift, return only the matrix
return affine_params[0] if fixed_origin else affine_params
# The return type depends on whether there is any origin shift
transform_type = DynamicMatrixTransform if fixed_origin else AffineTransform
else:
# Dynamically define the transformation function
def single_transform(from_coo, to_frame):
if from_coo.is_equivalent_frame(to_frame): # loopback to the same frame
return to_frame.realize_frame(from_coo.data)
return self(from_coo, to_frame)
transform_type = FunctionTransformWithFiniteDifference
return transform_type(
single_transform, self.fromsys, self.tosys, priority=self.priority
)
def _combine_affine_params(params, next_params):
"""
Combine two sets of affine parameters.
The parameters for an affine transformation are a 3 x 3 Cartesian
transformation matrix and a displacement vector, which can include an
attached velocity. Either type of parameter can be ``None``.
"""
M, vec = params
next_M, next_vec = next_params
# Multiply the transformation matrices if they both exist
if M is not None and next_M is not None:
new_M = next_M @ M
else:
new_M = M if M is not None else next_M
if vec is not None:
# Transform the first displacement vector by the second transformation matrix
if next_M is not None:
vec = vec.transform(next_M)
# Calculate the new displacement vector
if next_vec is not None:
if "s" in vec.differentials and "s" in next_vec.differentials:
# Adding vectors with velocities takes more steps
# TODO: Add support in representation.py
new_vec_velocity = vec.differentials["s"] + next_vec.differentials["s"]
new_vec = vec.without_differentials() + next_vec.without_differentials()
new_vec = new_vec.with_differentials({"s": new_vec_velocity})
else:
new_vec = vec + next_vec
else:
new_vec = vec
else:
new_vec = next_vec
return new_M, new_vec
# map class names to colorblind-safe colors
trans_to_color = {}
trans_to_color[AffineTransform] = "#555555" # gray
trans_to_color[FunctionTransform] = "#783001" # dark red-ish/brown
trans_to_color[FunctionTransformWithFiniteDifference] = "#d95f02" # red-ish
trans_to_color[StaticMatrixTransform] = "#7570b3" # blue-ish
trans_to_color[DynamicMatrixTransform] = "#1b9e77" # green-ish
```